How Propane Permits Work in Mississippi
Mississippi's LP Gas Board licenses dealers and sets statewide safety standards for LP gas installations. County building departments in more populated areas issue permits. Many rural counties have limited or no residential LP gas permit requirements beyond the state dealer licensing requirement.
Before purchasing or leasing a propane tank in Mississippi: call your County building department or fire marshal's office and ask whether a permit is required for your specific tank size and installation type. Rules vary within Mississippi and are subject to change. This one phone call protects you.
State Agency Role: MS LP Gas Board
MS LP Gas Board licenses dealers statewide. Even where no local building permit is required for an above-ground residential tank, the installation must be performed by an LP gas dealer or contractor licensed by this state agency. Verify your installer's license through the state agency's online lookup before signing a contract.
Permit Requirements by Installation Type
| Installation Type | Permit Required? | Who Issues | Typical Fee |
|---|---|---|---|
| Above-ground, under 125 gal | Verify locally | County building dept. or fire marshal | Often $0 or minimal |
| Above-ground, 125–500 gal | Commonly required | County building dept. or fire marshal | $30–$70 |
| Above-ground, 500+ gal | Required | County building dept. or fire marshal | $30–$70 |
| Underground, any size | Always required | County building dept. or fire marshal | Typically higher; verify |
| Gas piping (all sizes) | Almost always required | County building dept. | $25–$75 additional |
How to Find Your County's Specific Rules
- Step 1: Determine whether your property is inside a city/municipality (governed by city rules) or unincorporated County area (governed by County rules).
- Step 2: Search "[your County name] building department" to find the correct office and contact information.
- Step 3: Call and ask: "Do I need a permit to install a [size]-gallon [above-ground / underground] residential propane tank at [your address]?"
- Step 4: Ask about the gas piping permit separately — it is often required even when the tank permit is not.
- Step 5: Verify your installer's LP gas license with MS LP Gas Board.
NFPA 58 Setback Requirements Apply Statewide
Whether or not a permit is required in your County, NFPA 58 setback requirements represent the minimum safe distances for LP gas tank placement. Use our Setback Calculator for your tank size, then verify whether your local AHJ has adopted any additional requirements beyond the national minimums.
Mississippi does not have a single statewide residential LP tank installation permit requirement applying uniformly to all properties. Permit authority rests with local County governments and municipalities. The state agency (MS LP Gas Board) handles LP gas dealer and contractor licensing, not individual installation permits. Your specific requirements depend entirely on your County and whether your property is inside or outside city limits.
LP gas tank installations in Mississippi must be performed by an LP gas dealer or contractor licensed by MS LP Gas Board. Homeowner self-installation is not permitted for tanks connected to a home's gas supply in most circumstances. Always ask for the installer's license number and verify it with the state agency before work begins.
It depends on whether your rural County has adopted a residential building code. Some rural Mississippi Countys have no residential building code, meaning no local permit is required for above-ground tanks. Others have adopted codes requiring permits. Underground tanks always require a permit regardless of location. Call your County to confirm which situation applies to your property.